PVC pipe toddler chair
These are another simple and cheap DIY project that can be done in a few hours. This project was found at Que Linda. Our boys love these chairs. They carry these things around everywhere. You will need one piece of sturdy fabric such as corduray, denim, or upholstery. I cut the fabric at 29.5" X 17.5". I used 1/2" seam allowance. You can adjust the size of the chair and the fabric just as long as the fabric has enough slack when it's put on the chair. Once the fabric is cut, fold right sides together hot dog style and sew the long sides together. Then, move the seam so it is in the center and iron seams open. Sew shorter sides together. Leave a few inches on one side. Turn it inside out through that opening. Then lie it flat and fold the short sides towards the middle on the side of the fabric with the seam. I folded 3" on each side. Then sew it down. I ended up sewing two lines so it...